90014C RC10B64 Combo

  • Pinterest
This is the 1/10 scale Electric Powered, Radio Controlled Off-Road Competition RC10B64 Buggy Kit from Team Associated. **This combo includes;** #RT1508 Digital HV Hi-Torque Competition Steering Servo #27005 Blackbox 510R Competition ESC w/PROgrammer 2 #264 Reedy Sonic 540-M3 5.5 Modified Motor #27305 Reedy Zappers LiPo 4800mAh 100C 7.6V Shorty Battery FEATURES: Motor: Reedy Sonic 540-M3 5.5 modified, meets ROAR, EFRA, and IFMAR specs, dual ball bearings, balanced high-strength sintered rotor Electronic Speed Control: Reedy Blackbox 510R with the PROgrammer 2 fully adjustable brake, throttle, power, and safety functions PROgrammer 2 allows BEC voltage adjustment, temperature at which ESC cuts motor power, and more Steering Servo: RT1508 Digital HV hi-torque competition servo with metal gears, ball bearings, coreless motor and 187.4 oz-in (13.5 kg-cm) @ 6V, and 212.4 oz-in (15.3 kg-cm) @ 7.4V Battery: Reedy Zappers 4800mAh 100C 7.6V shorty configuration 2mm diameter balance port and 5mm diameter discharge connectors Chassis: Constructed of 0.098" (2.5mm) thick 7075 aluminum, narrow configuration with plastic side guards Drive: Four wheel shaft Differentials: Three bevel gear type Slipper Clutch: New adjustable center slipper clutch with Low Coefficient Friction Pads (LCF) Motor Mount: Factory Team aluminum, floating design allows consistent torsional chassis flex Steering Servo Mount: Aluminum/carbon fiber Shocks: V2 12mm Big Bore oil-filled aluminum body with 3mm TiN coated shafts and low friction X-rings for improved smoothness Shock Towers: 0.16" (4mm) thick carbon fiber Suspension: Adjustable axle height and roll centers, front and rear anti-roll bars Body: Team Associated clear body with JConcepts screw mounted wing Ball Bearings: Full set Factory Team Steering: Ball bearing equipped bellcrank type Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis, 7° aluminum caster blocks Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: RC10B64 Buggy Kit with clear Body, JConcepts Rear Wing, Decals, Silicone Shock and Diff Oil, 5mm Front Aluminum Drive Hexes, Instruction Manual, Steering Servo, ESC, Battery and Motor REQUIRES: Radio: 2-channel Battery Charger: To match selected battery Tires and Wheels: 1/10 scale buggy Pinion Gear: 48 pitch Paint, building & track equipment SPECS: Vehicle Wheelbase: 11.18" (284mm) Internal Gear Ratio: Body; Length: 11.4" (290mm) Width: 5.1" (130mm) Height: 2.9" (74mm)