112609 1/8 Savage XL Flux RTR

  • Pinterest
This is the Brushless Electric Powered, 2.4GHz Radio Controlled, Ready to Run 1/8 scale HPI Savage XL Flux 6S Monster Truck. FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098" (2.5mm) thick, extra low CG for high degree of control and cornering ability, twin battery boxes hold a variety of battery types Drive: Four wheel shaft Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm shaft, handles up to 25V of power, held in place with two machined 8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet aluminum motor mount Radio: HPI TF40 2.4GHz Electronic Speed Control: Flux ELH-6S, waterproof, proportional brake handles up to two 3S LiPo batteries, preinstalled cooling fan and T-plug connectors Steering Servo: SF-5 high torque metal gear Transmission: All metal gears running on rubber-sealed ball bearings Differential: Equipped with machined super heavy duty bevel gears, upgradeable with all Nitro Savage option parts Spur Gear: Machined steel, 44 tooth Suspension: Uprights designed for the larger tires and weight of the Savage XL Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm) diameter Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) wide Shocks: Big Bore dual-stage nylon bodied, oil filled Caster: Adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Body: Trimmed and painted GT-2 INCLUDES: Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork 2200 brushless motor, ELH-6 ESC, HPI 2.4GHz radio system, SF-5 high torque metal gear steering servo, painted & trimmed body, instruction manual REQUIRES: AA Batteries: Six for transmitter Batteries: Two 2S 7.4V hardcase LiPo batteries, at least 5300mAh (recommended) with T-plugs, or two 6-7 cell 7.2-8.4V NiMH with T-plugs Battery Charger: Depending on type of batteries selected Charging bag (if using LiPo batteries), building and track building and track equipment SPECS: Vehicle- Length: 23" (585mm) Width: 17" (427mm) Height: 10" (254mm) Wheelbase: 17.5" (445mm) Suspension Travel: 6" (152mm) Body- Length: 20.5" (520mm) Width: 7.9" (200mm) Height: 5.5" (140mm)